Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600

Goslash-DIOW

$437.99 $653.99
or 6 payments of $72.99 with Laybuy


This is the ARF version that comes without battery, charger, receiver and remote control.
Specification:
  • Eachine Wizard X220S
  • Wheelbase: 220mm
  • Frame arm: 4mm carbon fibre
  • Weight: 356g (without battery and camera mount)
  • Take off weight: 561g
  • 3K carbon fibre frame kit, 4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.
  • Frame kit with camera angle scale and 30° camera mount for Runcam 3 for Gopro session.
  • Anti-vibration sponges to protect the racer from crashing.
  • Eachine MN2206 2300KV motor
  • KV: 2300
  • Max thrust: 1100G
  • Length: 35MM
  • NO.OF cell: 3-5S
  • Diameter: 28MM
  • Framework: 12N14P
  • Shaft: 5mm
  • Propeller: 5 inch
  • Weight: 28g
  • Eachine 30A BLHELI_S 4 in 1 ESC
  • Con. current: 30A
  • Peak current (10S): 35A
  • Input voltage: 2-5S
  • BEC: 5V output
  • Programming: YES
  • Firmware: blheli_s
  • Weight: 28g
  • Size: 36*36MM
  • Eachine 1179 800TVL CCD camera
  • Colour: purple
  • Sensor: CCD
  • Resolution(horizontal center): 800TVL
  • Shell size: 25mm*25mm
  • Weight: 11g
  • Resolution: PAL: 1980H×1080 (2MP)
  • Format: PAL
  • Video output: 1.0Vp-p/75Ω
  • Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
  • AWB: ON/OFF
  • Exposure mode: electron exposure
  • Electronic shutter: 1/50(1/60) 1/100000 S
  • Gamma correction: 0.45/1.0
  • Synchronization method: internal synchronization
  • Lens: standard 2.8mm lens
  • Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
  • Working current: 70mA (low power consumption)
  • Working temperature:20℃--60℃
  • Humidity: 0%~98%
  • Strong backlighting effect
  • 8G 40CH 25MW 200mw 600MW
  • switchable transmitter
  • Video Format: NTSC/PAL
  • Channel: 40CH
  • Operating Temperature:10~85℃
  • Connector: RP-SMA Female
  • Antenna connector: RP-SMA Male
  • Omnibus F4 V3 flight controller
  • Size: 36x36mm
  • Mount holes: 30.5x30.5mm
  • STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time.
  • Using F4 MCU controls OSD over SPI bus in DMA mode.
  • OSD Configuration has been included in Betaflight GUI.
  • SBUS/PPM input (Pinheaders)
  • 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
  • With barometer
  • SPI Sensor MPU6000
  • Included 128Mbit Flash, please always use BEC for the FC.
  • Supported by BETAFLIGHT and dRonin
  • Eachine 5051 3-blade propeller
  • Colour: purple
  • Quantity: 10 Pairs
  • Mounting Hole: 5mm
  • Eachine Wizard X220S Omnibus F4 5.8G 40CH VTX 30A BLheli_S Dshot600 ESC 800TVL Camera With 30° Runcam3/ for Gopro Session Camera Mount
Package included:
  • 1 x EachineWizard X220S frame kit
  • 2 x 2206 2300KV motor CW
  • 2 x 2206 2300KV Motor CCW
  • 1 x Eachine 30A BLHELI_S 4 in 1 ESC
  • 1 x Omnibus F4 V3 flight controller
  • 1 x 1179 800TVL camera
  • 1 x 5.8G 40CH 25MW 200mw 600MW switchable VTX
  • 10 x Eachine 5051 3-blade propeller purple CW
  • 10 x Eachine 5051 3-blade propeller purple CCW
  • 1 x 30° Camera Mount(For Runcam3/ for Gopro session)
  • 1 x Pagoda antenna
  • 2 x Battery strap
  • 2 x Wrench
  • (Package doesn't include Runcam 3, the Runcam 3 on the pictures for reference
  • only.)
, , , , , , , , , ,


Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600 Fpv Racer Rc Drone Omnibus F4 5.8g 40ch 30a Dshot600