Fpv Racing Drone Bnf Frsky D8/d16 Dji Fpv Camera Caddx Vista - 2.5 Inch 130mm

Eachine Viswhoop 2.5 Inch 130mm 3-4S HD Cinewhoop FPV Racing Drone BNF Frsky D8/D16 DJI FPV Camera Caddx Vista
Specification:

• Brand Name: Eachine
• Item Name: Viswhoop 2.5 Inch 3-4S Cinewhoop
• Wheelbase: 130mm
• Size: 170mm*105mm*32mm
• Weight: 124g(without battery)
• Recommend Battery (Not Included) : 3S 650mah/750mah/850mah
• 4S 550mah/650mah/750mah/850mah

Features:

• Light 2.5 Inch Caddx Vista Cinewhoop
• Compatible both Frsky D8/D16 Radio transmitter and DJI FPV Radio transmitter
• New design 1204High-efficiency brushless motors
• Camera Angle adjustable
• Smooth and powerful
• Compatible both for 3s-4s Lipo/LIHV

Spare parts specifications:

• Motor Model: EX1204
• KV options: KV5000
• Lipo cells: 3-4S
• Configuration:9N12P
• Stator Diameter:15mm
• Stator Length:4mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.*Len):Φ15mm*15mm
• Weight(g):5.5g
• Propellers Brand Name: Gemfan
• Model: Flash 2540
• Item Name: 2540 2.5x4 Inch 3-Blade Propeller
• Material: PC
• Center Mounting Hole: 1.5mm
• Hub Thickness: 5mm
• Blade Width: 9.9mm
• Quantity: 4 Pairs
• Weight: 0.98g
• Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Board size: 28.5 x28.5MM
• Power supply: 2-4S battery input (DC 8V-17V)
• Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Frsky D8/D16 SPI receiver
• Built-in 2.4G Power Amplification
• Built-in Betaflight OSD(SPI Control)
• Built-in Current meter Max 70A
• Built-in 5V 1.5A BEC
• Built-in voltage detection
• Onboard 4in1 ESC MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HV (7v/17v)
• Current: 12A continuous peak 15A (5 seconds)
• Support BLHeliSuite programmable
• Factory firmware: F_H_40_REV16_7.HE
• Default protocol: DSHOT600
• Internal Frsky D8/16 receiver Version SPI BUS receiver
• Frsky D8/D16 compatible
• Compatible Non-EU or EU-LBT transmitter both D8 mode and D16 mode
• Channels: 8ch/16ch
• Dual antenna
• Failsafe support
• No ground interference ( Transmitter and receiver 1 m from the ground): 400m
• DJI FPV Camera Sensor: 1/3.2'' CMOS
• Effective Pixels: 4M
• Lens: 2.1mm,f/2.1
• Shutter: Rolling shutter
• ISO: 100-25600
• FOV: 150° (D)122° (H)93° (V)
• Caddx Vistam Brand Name: Caddx
• Item Name: Vista Kit
• Operating Frequency: 5.725-5.850GHz
• Transmitter Power(EIRP): FCC/SRRC/MIC: &amplt30dBm, CE: &amplt14dBm
• Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p 60fps): 30-40ms
• Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
• I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot
• Supported Flight Control System: F3,F4,F7
• Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
• Input Power: 7.4-26.4V

Package Includes:

• 1 x 130mm Frame Kit
• 1 x Toothpick F4 Flight Controller
• 4 x NC1204 KV5000 3-4S Motor
• 8 x Gemfan 2540 3-blade Propellers (4x CW, 4x CCW)
• 1 x Caddx Vista VTX
• 1 x DJI FPV Camera
• 1 x 2.5 Inch Propeller Guard