Fpv Racing Drone Pnp Caddx Turtle V2 1080p 60fps Hd Camera
Eachine LAL3 145mm 3 Inch 3-4S FPV Racing Drone PNP Caddx Turtle V2 F4 FC 1408 3750KV Motor 25A ESC 300mW VTX
Specification:
- Brand name: Eachine
- Item name: LAL3 3 Inch 3-4S FPV Racing Drone
- Take off weight: 175.3g
- Wheelbase: 145mm
- Bottom plate: 3mm
- Upper plate: 2mm
- Mode: 1408
- KV: 3750
- Idle current (IO/10V): 0.6A
- No.of Cells(Lipo): 3-4S
- Peak current: 23A
- Max. power: 386.4W
- Max. thrust: 600g
- Configu-ration:12N14P
- Internal Resistance: 0.0495Ω
- Stator Diameter: 14mm
- Stator Thickness: 8mm
- Height: 29.5mm
- Width: φ20mm
- Shaft diameter: φ5mm
- Motor mount hole size: M2
- Install hole distance: 12*12mm
- Recommend propeller: 2-3 Inch
- Weight: 17g
- 25A 3-4S Blheli_32 DSHOT1200 4 IN 1 ESC
- Continue current: 25A
- Burst current: 30A (10s)
- Input voltage: 3-4S
- BEC: NO
- Current sensor: NO
- Main control chip: STM32F051
- Firmware: Blheli_32
- Support DSHOT 150/300/600/1200/MULTISHOT/PWM/ONESHOT
- Weight: 3.8g
- Installation hole: 20x20mm/φ2
- Dimension: 31*29mm
- LAL3-F411 Flight Controller
- Main control chip: stm32f411
- IMU: mpu6000 6-axis sensor
- BEC: 5v / 1a
- Integrated OSD
- PPM / DSM / IBUS / UAR sharing: UART1-RX
- Installation size: 20 x20
- Weight: 3.0g
- Supported firmware: betaflight / cleanflight / inav
- Supports programmable LED Sprit
- Reserved buzzer interface
- Caddx Turtle V2 1080p 60fps HD Camera
- Horizontal: 800TVL
- TV system: NTSC/PAL,changeable
- Power Input: DC 5-20V
- Lens: 1.8mm
- FPV FOV: 155°
- Recording FOV: 160°
- DWR: YES
- OSD: YES
- Weight12g
- Camera Size19*19mm (It comes with a holder to increase the wide to 28mm)
- Audio: Support
- 4:3 16:9 Switchable
- Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)
- XF5806 /5.8G 40CH0/25/100/300mwVTX
- Frequency: 5.8G
- Channels: 40CH
- Input voltage: 7V~26V
- 260mA(MAX)[email protected]
- Support TBS Smart Audio
- Formate: NTSC/PAL
- Power supply: 5V output for Camera
- Output power: 0mW/25mW/100mW/300mW switchable
- Antenna connector: ipex
- Dimensions: 25x20x4mm
- Weight: 3.2g(Withour antenna)
- Racerstar 3040 3-blade
- Material: PC
- Blade: 3
- Colour: Transparent
- Center thickness: 5.5mm
- Center hole inner diameter: 5mm
- Weight: 1.8g/pc
- 1 x LAL3 145mm 3 Inch 3-4S FPV Racing Drone
- 8 x Propeller



