Usb Laser Engraver Desktop Diy Logo Mark Printer Carver - 3000mw
- Name: Laser Engraver
- Model: K3
- Material: ABS(Acrylonitrile Butadiene Styrene plastic) + Aluminium alloy
- Colour: Black + Gold
- Size:15.2x16.6x14.3cm (6"x6.5"x5.6")
- Voltage AC: 110-220V
- Laser power: 3000mW
- Carving area: 80x80mm(3.1"x3.1")
- Carving depth: 1mm
- Applicable range: Plane surface
- Supporting Systems: Mac & Windows XP/7/8/10
- Supporting image format: JPEG/ JPG/ PNG/ BMP
- Features:a laser carving machine for home use, used for carving wood, plastic, leather, etc.
- The product is a laser carving machine for home use, a tool machine, can not be compared with laser carving machine for industrial use.
- Do not use the laser head to point at human or livestock, do not use a laser to point at people’s eyes.
- The laser has power. skin exposure to laser is strictly prohibited.
- The caving machine should not be stopped while working, it will cause damage.
- This product is not suitable for kids under the age of 14.
- The software can support Mac /Windows XP/7/8/10
- Do not fall or make any collision to the product.
- The shell with laser cutting technology, sharp edge, please pick up and down gently to prevent scratches.
- Metal, glass, crystal and transparent or translucent stuff are can not be engraved.
- The colour of the item may vary slightly due to photography and different PC monitor, and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
- You might need to temporarily shut down the antivirus software before downloading the software. Otherwise, some files in the software would be mistaken for virus and deleted by antivirus software.
- Please according to the user manual to operate the machine. After 20 minutes of working, it needs to take a break, can not work continuously for a long time.
- Step 1: Insert the USB disk
- Step 2: Install the "driver.exe"
- Step 3: Must Copy the "English zip" to the Computer desktop and then unzip it.
- Step 4: Connect the engraver to a computer
- Step 5: Open the "scarves-en.exe" which is unzip from the "English zip"
- 1 x Laser Engraver
- 1 x Power Cord (US Plug)
- 1 x USB Disk
- 1 x USB Cable
- 2 x Wooden Board
- 1 x Laser Focusing Paper
- 1 x Screw Driver
- 5 x Screws
- 5 x Screw Caps